ADTRAN ATLAS 810 Plus, User Manual

Page: 113 / 188

Chapter 9. Dial Plan Terminal Menu
61200266L1-1 ATLAS 810
PLUS
User Manual 9-19
DID Prefix
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as a part of the
DID number. ATLAS uses the combination of prefix and DID number to
determine the User endpoint that should receive the incoming call.
» Caller ID Number
Write security: 3; Read security: 5
Defines the number for ATLAS to use to provide Caller ID to the Network
for outgoing calls sent through this endpoint. This option only displays if
Direct Inward Dialing is set to
'LVDEOHG
. This item is optional.
»» Strip MSD Write Security: 3; Read Security: 5
Allows a selected quantity of the Most Significant Digits (MSD) of a dialed
number to be stripped prior to being forwarded out of the port. For exam-
ple, a User port could be set to accept all calls beginning with 8 (8$), and
then with Strip MSD set to 1, all digits would be sent toward the network
except the leading 8.
»» Source ID
Write security: 3; Read security: 5
Simplifies the creation of a Dial Plan in applications where the criterion for
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
• Default value = 0. The default ID for all endpoints is 0 and all accept # s
is 0. With default values, all calls are routed based only on dialed num-
ber.
• Multiple endpoints can have the same Source ID.
• When creating the Call Accept list, specify a Source ID (s) as well as a
dialed number or range of dialed numbers to accept.
For example, an application requires that all calls that originate from Port 1
of the Quad T1/PRI module in Slot 1 be switched to Port 4 of that same mod-
ule. Assign a unique Source ID (e.g. 7) to Port 1 of the module, and then con-
figure Port 4 to only accept calls from that unique Source ID (7).
.
If DID is Disabled, then you must define the trunk number.
The Caller ID number must be specific (i.e., no “wild cards”).
The Strip MSD parameter does not affect the Call Accept criteria.
All of the digits (including the MSDs that are subsequently
stripped) are used as accept criteria.