ADTRAN ATLAS 810 Plus, User Manual

Page: 127 / 188

Chapter 10. Updating Firmware
61200266L1-1 ATLAS 810
PLUS
User Manual 10-3
When the update process has successfully completed,
Idle
displays in the
Current Update Status
field and
Module Update Complete
displays in the
Previous Update Status
field. Either the module restarts immediately and
resumes operation, or it restarts at the specified time and day of the week—
depending on your selection.
If an error occurred during the update process,
Previous Update Status
displays an appropriate error message.
Figure 10-1. Update Firmware Menu Interface
8
From the terminal emulation software, begin the XMODEM upload
by using the appropriate command sequence. (If necessary, refer
to your terminal emulation software documentation for help. Also,
when specifying the filename, ensure that the file transferred is the
one provided by ADTRAN; otherwise, the update will not complete
successfully.)
Because XMODEM data is being transferred in-band through the
menu interface, the VT-100 menus of ATLAS will be inoperable
from the Chain In port. You can cancel the update at any time
within the terminal emulation software. (Please consult the
documentation provided by the terminal emulation software to
determine how to do this.)
9
To update additional modules, begin at step 3 and repeat this
process.
Instructions for Updating Firmware Using XMODEM
(Continued)
Step Action