ADTRAN ATLAS 810 Plus, User Manual

Page: 142 / 188

Chapter 12. ADTRAN Utilities
12-6 ATLAS 810
PLUS
User Manual 61200266L1-1
>
SESSION
MENU
Click on Session to open the Telnet session.
» Connect
Opens dialog box for
setting
Host Name and
Port parameters for a
Telnet session. Also lets
you
Edit Entry , Add
New entry, and Delete
stored entries. When the parameters are set, click Connect to make the con-
nection. Click Cancel to end the session.
»» Host Name Accepts and stores host names. You may either enter a name, an IP address,
or a domain name directly from this field. Click on the drop-down arrow to
display a complete list of previously stored host names.
»» Port Provides several port options. You may enter port numbers directly into this
field to connect to non-standard ports or select the drop-down combo-box to
display the following options:
»» Edit Entry
Changes either the unit name or
the IP address of each host. Press
either
Tab, Return,
or a
period (.
)
after each number in the IP ad-
dress to move to the next field. If
you press
Return
or
(.)
while the
cursor is located in each IP field,
that field entry is deleted.
»» Add New
Prompts you for the same information as the
Edit Entry
dialog box for new
host. When enabled, the
Use DNS
(Domain Name Server) feature allows users
to request
Domain Look Up
via a DNS server on the network, rather than spec-
ifying an IP address. The name then appears in the
Host Name
field.
»» Delete Removes a host name from the list; simply select the host name you want to
remove, and, at the prompt, click
Delete .
»» Connect Establishes the Telnet session.
» Disconnect
Terminates the Telnet session.
To re-establish the session, select Connect from Session Menu or press En-
ter three times. This action restores the previous connection.
Telnet Establishes a Telnet session
Echo
Provides a loopback for troubleshooting
Discard Bit bucket; discards data
Daytime
Returns the time
Chargen Displays as a unique character stream; used for self-tests