Adtech ADTECH4 CNC Series, Maintenance Manual

Page: 48 / 201

ADTECH4 SeriesCNC Maintenance Manual
Press [File] to enter file operation interface;
Select desired program, which is in PROG directory in disk D by default, press [EOB] to enter
subdirectory, or press [Cancel] to exit;
Move cursor to select desired program, press [EOB] to confirm and load the program.
8.2.2. Reading Programs from USB Disk into Work Area
The step of loading files from USB disk into work area follows:
Insert the USB disk;
Press [File] to enter file operation interface;
Select USB disk, move cursor to select a file in the disk, and press [EOB] to load the file.
8.3 Editing & Modifying Programs

The program in CNC memory can be edited with NC keypad. In the main menu, press
[Edit] to enter program edit interface and edit the program in current work area (for
loading program into work area, refer to 8.2). The edit mode is similar to notepad in
Windows. Move the cursor directly to locate, press keys to enter, press [EOB] to change
line, and press [Delete] to delete the character where the cursor locates.

Caution
After all operations, press Reset to save the files, and the functions base on edit mode;
CNC46XX uses new file mapping technology, and allows loading processing files that exceed its memory.
Therefore, to ensure the system efficiency, you can only search and process, but can’t edit the processing files
that exceed 2MB.
8.4 Deleting Files
8.4.1. Deleting Files in Memory
Follow the step below to delete the programs in system memory:
Press [File] to enter file operation interface;
Follow the prompt on the screen, select the file and press [Delete] to confirm and delete the file.

Caution