Adtech ADTECH4 CNC Series, Maintenance Manual

Page: 143 / 201

ADTECH4 SeriesCNC Maintenance Manual
Authority : Operation admin
Default : 0 (Chinese)
Effective time : Instant
Note : Macro keyword effective parameter is used to set whether the macro
expression symbol set on the face is valid; 1: valid, 0: invalid.
018
Boot screen mode
Range : 0~6
Unit : None
Authority : Operation admin
Default : 1S
Effective time : Instant
Note : Used to configure logo display mode; if it is set to 0, press any key to enter
the system; for non-zero value, it enters into the system automatically after
corresponding time delay.
019
Sys display axis setting (bit)
Range :
Unit : None
Authority : Super user
Default : XYZ
Effective time : Instant
Note : Used to configure the display axis of current system, and different display
combinations are available.
This configuration only determines the content of the interface. If the axis
function of the hardware exists, it still can output axis control during
programming, but the axis status won’t be displayed. The status such as
axis limit and alarm will be ignored.
020
System debugging info enable
Range : 0~1
Unit : None
Authority : Super user