manualshive.com logo in svg

Adtec RD-60, User Manual, Page: 37 / 61

Share
Download
Adtec RD-60 User Manual Download Page 37

Click on the Install button associated with the new file. Wait for it to completely extract and 
become available in the Installed Versions List. Once available there, simply click on the 
Select button associate with the new firmware and wait for your device to reboot.

Demodulator Firmware Upgrade via Web User Interface

In some cases, Adtec may provide a modulator or demodulator firmware upgrade.  These 
are handled separately than standard product firmware upgrades because they can take 
longer than a product firmware update and should be planned during maintenance windows.
Adtec currently has several demodulator versions that include ADV, LB and PRM models.  
Each demodulator hardware type has a unique demod firmware version and must be 
upgraded with a compatible version.

To upgrade, first determine the installed demodulator type and firmware version.  Visit the 
Upgrade -> Features tab.  The ‘BOARDS INFO’ table slot 99 will contain the installed 
demodulator version.

The above example shows a PRM demod running demod version 1.17.  In this case, a 
7044AB firmware file name is required to update this demodulator.  If a demodulator 
firmware is provided for any reason, please make sure the firmware type provided matches 
the hardware type of the unit it is being installed on.  The demod firmware may be 
upgraded similarly to a product firmware upgrade.

Click on the upload button located at the top right of the application.  Select the firmware 
file from the local computer and wait for it to upload.  Once it has finished uploading, it will 
appear in the Available Demodulator Versions list.

Summary of Contents for RD-60






























































Reviews:

No comments