value is 300 milliseconds. If the timeout
value is set too low, the multicast receive
may timeout during normal reception if the
packet transmission is bursty.
Video Menu
Item
Function
Options
Output Menu
Fault Mode
Display or Modify the current SDI
video fault setting. This setting
sets the video resolution when in
video fault.
This setting will be applied on
startup when no video is present.
If video becomes present, the
setting will be overridden by the
current video setting.
480i59.94
576i50
720p59.94
720p50
1080i59.94
1080i50
Video Loss
When video is not detected on
the configured input, this setting
will define the output.
OFF:No video output on fault
BLANK:Only blanking on fault
BLANKTONES: Blanking and tones
on fault
BLANKOVERLAY: Blanking and
overlay on fault
BLANKTONESOVERLAY
Blanking, tones and overlay
on fault
When a type with BLANK is selected,
the current bars/matte setting will
be applied.
When a type with TONES is
selected, the current tones setting
will be applied.
When a type with OVERLAY is
selected, the current device name
