Adtec edje 4111 HD, Operation Manual

Page: 23 / 42

21 Chapter3 - mediaControl Setup
Graphic
The Graphic configuration page lets you set up actions to position
and scale graphic elements on the display from schedules and directly
from mediaControl. (Fig 3.6)
Figure 3.6
Action Name:
The name of the graphic action.
Region:
The graphic layer region to apply the graphic (note: only region 1 is
supported at this time).
Origin X:
The X axis origin value for the graphic. You can also enter an actual pixel
value starting at 0 for the left of the display.
Origin Y:
The Y axis origin value for the graphic. You can also enter an actual pixel
value starting at 0 for the top of the display.
Transparency:
Select the transparency level of the graphic where 100 is solid and 0 is
transparent or enter your own value.
Width:
Select the width to scale the graphic or enter your own value. FIXED
ASPECT will retail the aspect ratio of the width against the height value.
Height:
Select the height to scale the graphic or enter your own value. FIXED
ASPECT will retail the aspect ratio of the height against the width value.
The following options are available when configuring graphics:
New:
To add a new scaling action, click new and enter the desired parameters
and click Save.
Save:
To make changes to a scaling action, select it from the list, make the
changes and click Save.
Delete:
To delete a scaling action, select it from the list and click delete.
Apply:
To use a scaling action, select it from the list and click apply.