Using the USB Mouse:
1.
Use the USB mouse to select the User Name from the Drop-down menu.
2.
Click in the
Password
field. The virtual keyboard appears.
Figure 2-3
3.
Toggle the
ABC/ abc
button or
Shift
key to select between upper or lower case letters.
Note:
Because the numeric pad appears on both upper case and lower case virtual keyboards, you
do not need to change keyboards to make numeric entries.
4.
Select the desired alpha/numeric character. It turns green and enters the
Password
field.
5.
Repeat until all characters are entered.
6.
Click
Enter
on the virtual keyboard. The keyboard disappears.
7.
Click
OK
on the System Login dialog to enter.
Using the Remote Control:
1.
Press
Enter
. The SYSTEM LOGIN dialog appears. Press Esc to remove the dialog.
2.
The User Name field is highlighted in light blue. Use the
and
arrow keys to select the
desired user name.
3.
Use
►
arrow key to shift to the Password field. It is highlighted in light blue.
4.
Press the
Shift
key to toggle between upper case letters, lower case letters or numeric input.
5.
Use the keypad on the remote to enter the desired characters.
6.
Press the
Enter
key on the remote. The keyboard disappears.
Using the Front Panel:
1.
Press
Enter
. The SYSTEM LOGIN dialog appears. Press Esc to remove the dialog.
2.
The User Name field I highlighted in light blue. Use the
and
arrow keys to select the
desired user name.
3.
Use
►
arrow key to shift to the Password field. It is highlighted in light blue.
4.
Press the Shift key to toggle between upper case letters, lower case letters or numeric input.
5.
Use the numeric values on the various keys to enter the desired characters.
6.
Press the
Enter
key. The keyboard disappears.
Note:
For security reasons, modify your password after your first login.
•
Three (3) sequential login failures will result in a system alarm
•
Five (5) sequential failures will result in account lockout
NVR7400 Series User Guide
12
