Hybrid Standalone NVR User Guide
Figure 4-65
No Disk Space
To enable notification(s) when no disk space is detected:
1.
Check the
Enable
box.
2.
Enter the percentage of available disk space to be remaining for the alarm to be triggered.
3.
Check the box associated with the desired notifications:
Show Message.
If enabled, a pop up alarm message appears in the local host screen.
Send Email.
If enabled, an email alert is sent to you when an alarm occurs.
Alarm Upload.
If enabled, the alarm signal is uploaded to the network.
Buzzer.
If enabled, a buzzer sounds when an alarm occurs.
Message.
If a 3G network is connected, a message is sent when the anomalous event
occurs.
Note: This feature is not supported by ADT at this time.
4.
Click
Save
.
Figure 4-66
Network Disconnection
To enable notification(s) when the system becomes disconnected from the network:
1.
Check the
Enable
box.
2.
Check the box associated with the desired notifications:
Show Message.
If enabled, a pop up alarm message appears in the local host screen.
Send Email.
If enabled, an email alert is sent to you when an alarm occurs.
Buzzer.
If enabled, a buzzer sounds when an alarm occurs.
Message.
If a 3G network is connected, a message is sent when the anomalous event
occurs.
Note: This feature is not supported by ADT at this time.
3.
If desired, set up channels to record if this event occurs:
NVR7400 Series User Guide
194
