Hybrid Standalone NVR User Guide
•
Record Channel.
The system automatically activates to record selected channels once
the error occurs. Check the box to enable, and the click the buttons for the channels that
you want recorded. The selected channels are highlighted.
•
Delay.
To avoid rerecording the same event, enter the number of seconds to wait after
the event has ended before a new recording can begin. This value ranges from 10s to
300s.
4.
Click
Save
.
Figure 4-67
IP Conflict
To enable notification(s) when an IP conflict is detected:
1.
Check the
Enable
box.
2.
Check the box associated with the desired notifications:
Show Message.
If enabled, a pop up alarm message appears in the local host screen.
Send Email.
If enabled, an email alert is sent to you when an alarm occurs.
Buzzer.
If enabled, a buzzer sounds when an alarm occurs.
Message.
If a 3G network is connected, a message is sent when the anomalous event
occurs.
Note: This feature is not supported by ADT at this time.
3.
Click
Save
.
Figure 4-68
MAC Conflict
To enable notification(s) when a MAC conflict is detected:
1.
Check the
Enable
box.
2.
Check the box associated with the desired notifications:
NVR7400 Series User Guide
195
