– 4 –
!
1. Disconnect power from the control, including the battery, BEFORE installing the GSMVLP-ADT
module.
2. CAUTION: ESD SENSITIVE DEVICE. To discharge any static buildup, briefly touch a chassis
ground point before installing this module. Avoid performing this installation while standing on a
carpeted floor
.
Opening the ADT QuickConnect 3000 Control and Installing GSMVLP-ADT
1. Install the provided IC label (P/N 800-05101) on the control’s back case as shown on Figure 2.
GSMVLP-005-V0
CONTAINS TRANSMITTER MODULE
IC: 7830A-MC55I
IC MODEL: LYNXPLUS1
FCC ID: QIPMC55I
800-05190 10/09 Rev A
Figure 2 – IC Label location
2. Release the control’s front case assembly from the rear case by depressing the two locking tabs at
the top of the unit with the blade of a medium size screwdriver (refer to Figure 3).
