– 15 –
GSMVLP-ADT Status Displays
[E]
PriRSSI GPRS REG
-xxxdbm x x
GSMVLP-ADT Status Display Screen 1
PriRSSI – Primary Site RSSI level in dbm
GPRS – GPRS Service availability where “x” can be:
“Y” if GPRS is available
“N” if GPRS is Not available
REG – Registration status from radio module where
“x” can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the last screen.
Cntry Netw LAC
xxx xxx xxxxx
GSMVLP-ADT Status Display Screen 2
Cntry – Country Code
Netw – Network Code
LAC – Local area code
Press the [space] key to get to the next screen.
Press the [backspace] key to go to the previous field.
Cell BaseSt Chan
xxxxx x xxx
GSMVLP-ADT Status Display Screen 3
Cell – Base Station ID
BaseSt – Base Station Antenna Sector
Chan – Control Channel in use
Press the [space] key to go to the next screen.
Press the [backspace] key to go to the previous field.
Second Site RSSI
-xxxdbm
GSMVLP-ADT Status Display Screen 4
Secondary GSMVLP-ADT Site RSSI level in dbm.
Press the [space] key to go to the GSMVLP-ADT Status Display
Screen 1.
Press the [backspace] key to go to the previous field.
[S]
ECP Flt
OK
ECP Mode
Displays the mode of operation and system fault status.
[T]
Test Msg Sent
Test Alarm
Sends a Test alarm to AlarmNet. Functional for a
registered
GSMVLP-ADT only. If the device is not registered, a message is
displayed indicating that the command cannot be executed.
[X]
Reset CPU Y/N
Reset the GSMVLP-ADT.
Pressing [N] returns to normal mode.
Pressing [Y] resets the device.
