ADT Pulse
®
Interactive Solutions iCamera-1000-ADT Indoor Low-Light Camera
Installation Guide
10
10.
Click
Finish
after installation is complete.
Figure 4: Installation Using POE Cable
11.
Unplug the Y-cable from the ADT Pulse Gateway, and then power off the
camera.
IMPORTANT
IF CAMERA WILL BE INSTALLED AS A ‘WIRED’ CAMERA,
USE THE LAN CABLE AND THE Y-CABLE. (REFER TO
FIGURE 3 ON PAGE 5 OF THIS GUIDE.) IF CAMERA WILL
BE INSTALLED AS A ‘WIRELESS’ CAMERA, USE THE POE
CABLE TO SUPPLY POWER TO THE CAMERA.
