ADT Pulse
®
Interactive Solutions iCamera-1000-ADT Indoor Low-Light Camera
Installation Guide
11
iCamera Wall Mounting Instructions
NOTE
Ensure that the iCamera is properly configured and added to
the network before mounting the camera.*
1.
Stand Placement
Locate an area where you want the
iCamera
to be mounted. Using the
wall plate as a template, make two small marks inside the mounting
holes of the wall plate.
2.
Attach the Wall Plate to the Back of the Stand
Place each screw in the designated slot of the wall plate until fastened.
3.
Screw in 2/3 of the length of the mounting screws into the wall and drill
a hole for the Ethernet cable.
__________________________
*
If the iCamera is to be mounted outside the range of the wireless network, consider
including the WN2RP-ADT Wi-Fi Extender.
