ADT Pulse
®
Interactive Solutions iCamera-1000-ADT Indoor Low-Light Camera
Installation Guide
14
PIR Video Motion Detection
The motion event will be captured when a significant image changes within the
Window of Interest. The Window of Interest is defined below.
The following installation hints should be noted:
1.
Take care not to install facing direct sunlight, bodies of water, or areas of
moving shadows as these can lead to unintended triggers.
2.
Do not position the PIR camera facing a window or direct sunlight. The
device is also not suitable for using in draughty area where air conditioner or
fan is installed. The excessive wind may cause false video triggering.
3.
Avoid aiming directly near heat sources, such as fires, radiators, boiler, air
conditioners and so on.
4.
Mount the PIR camera where possible, so that the logical path of an intruder
would cut across the detecting area rather than directly towards the device.
NOTE
PIR video detection is susceptible to light reflection, shade or
tree/leaves movement caused by strong wind and so on. To
reduce the number of unwanted video events, please follow the
camera installation guide and make the adjustment accordingly.
