background image

adt-audio



ToolMod Faderbox

modular Summing Mixer

8

®

®

Safety Instructions

Repairs

In case that:

  • you think repairs are necessary

  • objects or fluids have gotten into a device 

  • the device fell to the ground 

  • the device is otherwise mechanically damaged

  • the device is not working properly

  • the power cord is damaged

  • the device was exposed to rain 

  • the device fell into water

Disconnect the power immediately and contact a qualified service tech-

nician. 

Make sure to inform the service technician about anything that has hap-

pened to the device.  

In case that the power cord is damaged, do not touch the cord or the de-

vice but switch of the main circuit breaker before disconnecting the pow-

er cord.

WARNING:

RISK OF DEATH BY ELECTRIC SHOCK!

Spare Parts

Make sure that only original parts are used for repair or replacement. Wrong 

spare parts may cause fire, electric shocks, subsequent damages, and other dan-

gerous risks. Otherwise, the warranty is void and no liability will be assumed.

Safety Test

Insist that the service technician conducts a thorough safety test to ensure that 

the condition of the repaired device is safe and up to factory standards. 

Factory Repair

If you intend to send defective devices to the factory, please get in touch with 

us by phone (0049 2043 51061) or by email (support (at) adt-audio.com) and 

let us know:

 • Type and serial number of the defective device

 • Date of purchase and name of the dealer, 

Summary of Contents for ToolMod Faderbox





























































Reviews: