adt-audio ToolMod Faderbox, Installation Manual

Page: 44 / 60

adt-audio

ToolMod Faderbox
modular Summing Mixer
44
®
®
Frame Options
All versions of the ToolM-
od Faderbox can be used
as desktop, 'lunchbox', or
rack-mounted version. In-
stallation in a desk or con-
sole is possible as well. The
frame is identical for all
versions. By adding rubber
feet, handles, or brackets
the frame can be adapted
in the desired way. The pic-
tures show these options.
The standard side panels
contain the necessary th-
reads and fixing holes for
all versions.
Desktop and Lunchbox
Version
The picture on top of this
page shows the side view of
a desktop Faderbox. Woo-
den side panels to cover
the screw heads in the side
panels are available. Rub-
ber feet are installed in the
bottom sheet. Handles can
be installed on one or both
sides of the frame (see pic-
ture to the right, 'Lunchbox'
style).
Rack mounting and Installa-
tion in a Desk or Console
The standard rack brackets
for the ToolMod Faderbox
can be used for rack moun-
ting or the installation in a
cutout in a desk. It is possible
to install the brackets in four
different ways. The pictures
Desktop Version
Lunchbox Style with Handle
Faderbox Frames