Industrial PCs OPC6012/6015
7
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
1.3
D
ATA
,
FIGURES AND MODIFICATION
All texts, data and figures are non-binding. All these materials are subject to modification
due to technological progress. Our products comply with all provisions and requirements of
the legislation at that point in time when the products leave our company premises. The
operator/operating company bears sole responsibility for the compliance with any
consecutive new technological development or adherence to any consecutive new
legislatory provision, as well as for the observance of their obligation as the
operator/operating company.
Pos : 5 /D at entechni k/ Allgemei ne Hinweis e/ War enzeic hen/ Warenz eichen @ 2\ mod_1263298182965_6. doc @ 6972 @
1.4
T
RADE MARKS
We would like to emphasise that all names of hardware and software products used in this
documentation, as well as all brand names of corresponding companies are subject to the
general copyrights of the intellectual property in terms of trademarks, brand names and
patents.
Windows
®
, Windows
®
CE are registered trademarks of Microsoft Corp.
Intel
®
, Pentium
®
, Atom™, Core™2, are registered trademarks of Intel Corp.
IBM
®
, PS/2
®
and VGA
®
are registered trademarks of IBM Corp.
CompactFlash
®
is a registered trademark of the Compact Flash Association.
RITTAL
®
is a registered trademark of Rittal Werk Rudolf Loh GmbH & Co. KG.
Any other national and international trademarks and product names shall hereby also be
recognised.
Pos : 6 /D at entechni k/ Allgemei ne Hinweis e/Urheberrecht/Urheberrecht @ 0 \mod_1158756954232_6. doc @ 153 @
1.5
C
OPYRIGHTS
This manual including all contained figures is protected by copyright law. Any use of this
manual by a third party in non-compliance with the international copyright law shall hereby
be prohibited. Any reproduction, translation and electronic or photographic archiving or
modification requires previous written agreement by ads-tec GmbH.
In the event of non-compliance, you shall be obliged to compensate for damages.
Pos : 7 /D at entechni k/ Allgemei ne Hinweis e/U mweltbedingungen/U mwelt bedinungen f ür VMT 60xx- Seri e @ 2\ mod_1263307758056_6. doc @ 6981 @
