Industrial PCs OPC6012/6015
30
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
8.2
T
OUCH SCREEN DRIVER INSTALLATION
Note:
When installing the driver, you'll have to take in account that the touch screen
monitor is internally connected with the USB interface!
Touch screen monitor and PS2 mouse can be operated simultaneously.
The installation has to be carried out as described below:
Switch on PC and boot.
Access the service CD by using the Explorer and start the Installer file in the
TouchScreen folder.
Follow the on-screen instructions and acknowledge the licence terms and
conditions.
Once the installer has completed the installation, shut down the computer and
restart it subsequently.
After restarting, the touch screen monitor has to be calibrated. If the driver does
not automatically start, activate the setup menu via "
Start
=>
Settings
=>
Control
panel
=>
Elo Touchscreen
".
Via the "
Calibration data
" menu, calibrating the touch screen monitor can be
started, and the crosses appearing in a succession on the monitor have to be
pushed for calibration. If the cursor position perfectly matches the touch point of
your finger, you can exit this control menu by pushing "
OK
".
Pos : 38 /D atent ec hni k/Sondergeräte-M odule/VMT 6000-Serie/ VMT 6000-Soft ware Tools @ 2\ mod_1268751957235_6.doc @ 7393 @
