7)
DOOR FRAME
– The Door Frame
allows an Adobelite Screen Door or
Glass Door to be used with the fire‐
place. Begin by attaching the Door
Frame to the Manifold. Position the
Door Frame on top of the Manifold
and allow a
1
/
2
” space between the
1
/
2
” Angle Iron on the top of the
Access Door and the Door Frame.
Use two 1
1
/
4
” x #8 self drilling (black
head) screws to secure the Door
Frame to the Manifold.
FIREBOX ASSEMBLY
(CONTINUED):
7
Front Arch
7
1
/
2
” Angle Iron
1
/
2
” Space
7A –
Door Frame
5” Black
Head Phillips
Screws
8) ANCHOR PLATE
– Apply a thin layer of refractory mortar to the top of firebox where the Anchor Plate will sit.
Align the back edge of the Anchor Plate opening with opening in the firebox top section. Secure the Anchor
Plate using four ¼” dia. x 3” long lag bolts.
Plumb the Door Frame vertically,
then secure the Door Frame to the
Front Arch using two 5” (black
head) wood screws.
Finally, the Ball Catch (FIG. 7B)
needs to be installed to the door
frame. Begin by drilling a 1” deep x
3
/
4
” dia. hole through the mounting
tab and into the Front Arch. Slide
the Ball Catch up into the hole and
secure it to the mounting tab on the
Door Frame with the two provided
brass screws.
7B –
Ball Catch
8 –
Anchor Plate
8
¼” dia. x 3”
lag bolts
3
/
4
” x 1” Hole
7
Front Arch
Ball Catch
Screws
Mounting Tab
Access
Door
13