Adobe FRAMEMAKER 6.0, Manual

Page: 13 / 323

13 ADOBE FRAMEMAKER 6.0
Introduction
Character set in strings
MIF string data uses the FrameMaker character set (see the Quick Reference for your FrameMaker
product). MIF strings must begin with a left quotation mark (ASCII character code ) and end with a
straight quotation mark (ASCII character code ). Within a string, you can include any character in the
FrameMaker character set. However, because a MIF file can contain only standard ASCII characters and
because of MIF parsing requirements, you must represent certain characters with backslash (\) sequences.
All FrameMaker characters with values above the standard ASCII range (greater than ) are represented in
a string by using
nn
notation, where
nn
represents the hexadecimal code for the character. The
hexadecimal digits must be followed by a space.
The following example shows a FrameMaker document line and its representation in a MIF string.
You can also use the statement to include certain predefined special characters in a statement (see “Char
statement” on page 136).
Device-independent pathnames
Several MIF statements require pathnames as values. You should supply a device-independent pathname
so that files can easily be transported across different system types. Because of MIF parsing requirements,
you must use the following syntax to supply a pathname:
`<code\>name<code\>name<code\>name…'
where
name
is the name of a component in the file’s path and
code
identifies the role of the component
in the path. The following table lists codes and their meanings.
Character Representation
Tab \ t
> \ >
\ q
` \ Q
\ \ \
nonstandard ASCII \x
nn
In a FrameMaker document In MIF
Some `symbols': > \Ø¿! `Some \Qsymbols\q: \> \\\xaf \xc0 !'
Code Meaning
r Root of UNIX file tree (UNIX only)
v Volume or drive (Macintosh and Windows)
h Host (Apollo only)
c Component