Chapter 3
Hardware
38
Reference Manual
ReadyBoard 910
Wake Up Activities
The wake up events listed in
can be used to wake up the ReadyBoard 910 from any of the
supported sleep states mentioned above.
Table 3-22. Wake Up Activities and Conditions
Signal/Device
Condition
Power-On Button
If the Power-On button is pressed, the system will wake up from any of the
sleep states.
Ethernet Ports (2)
(LAN Ports)
The system will wake from one of the sleep states through direct addressing
or magic packets.
PS/2 Keyboard &
Mouse
If you use a PS/2 keyboard or mouse, any activity from the keyboard or
mouse could wake the system.
USB Devices
If you use a USB keyboard or mouse instead of a PS/2 device, the USB
device could wake the system.
Serial Ports (2)
If Wake On Ring is [Enabled], then Serial Ports 1 and 2 can be used to wake
the system.