ADLINK Technology LittleBoard 735 Reference Manual Download

Page: 49 / 54

Chapter 4

BIOS Setup

LittleBoard 735

Reference Manual

Logo Screen Utility (Splash Screen)

The LittleBoard 735 BIOS supports a graphical logo utility, which can be customized by the user and

displayed when enabled through the BIOS Setup Utility. The graphical image can be a company logo or any
custom image the user wants to display during the boot process. The custom image can be displayed as the

first image displayed on screen during the boot process and remain there, depending on the options selected

in BIOS Setup, while the OS boots.

Logo Screen Image Requirements

The user’s image may be customized with any standard image editing tool.

The LittleBoard 735 logo screen utility supports the following image formats:

•

Bitmap image

•

Exactly 640 x 480 pixels

•

Exactly 16 colors

•

Bitmap image

♦

16-Color, 640x480 pixels

♦

256-Color, 640x480 pixels

•

JPG image

♦

16-Color, 640x480 pixels

•

PCX image

♦

256-Color, 640x480 pixels

•

A file size no larger than the sample image

NOTE

For procedures on loading custom images, see the logo screen utility document
available on the ADLINK website.

NOTE

For procedures on loading custom images, see the OEM Logo Utility
document available on the ADLINK web site.

Summary of Contents for LittleBoard 735























































Search results

Summary of Contents for LittleBoard 735

Reviews:

Related manuals for LittleBoard 735

Brands by name

Popular brands

ADLINK Technology LittleBoard 735, Reference Manual

Search results

Summary of Contents for LittleBoard 735

Reviews:

Related manuals for LittleBoard 735

Brands by name

Popular brands