52
•
ISaGRAF Programming
Input parameters of HSLink R8DI16 module ISaGRAF driver
The Input parameters of HSLink R8DI16 module ISaGRAF driver are
described as below:
card_ID :
The sequence number of HSLink master card. The first card (in
the most prior slot) is with card_ID=0. For example, if there are
two HSLink master cards plugged on your PC, the HSLink
master card in prior slot should be registered with card_ID=0,
the other HSLink master card card with card_ID=1 (The setting
of Compact-PCI cards is in the same way) .
set_ID :
The set_value of this slave I/O module use. In general,
PCI-7851 provide 1 set and PCI-7852 provide 2 set. So the valid
set_ID value for PCI-7851 is 0 and the valid value for PCI-7852
is 0 or 1.
slave_No : The address of this HSLink slave I/Omodule. The valid value is
between 1 and 63.
