6
•
HSLink Introduction
Ø
HSLink for SCADA system
HSLink is suitable for SCADA (supervisory control and data acquisition)
system. The character of HSLink in a SCADA system is DAQ hardware but
HMI toolkit. Users still need some SCADA software to accomplish the
completely SCADA function. The reason why HSLink is suitable for SCADA
is described below:
l
HSLink is based on an open Architecture of PC.
l
HSLink is able to support Mass I/O points
l
HSLink is capable of real-time remote DAQ
The PC-based characteristic of HSLink system opens a highway to the “e”
world. User just set up his own HMI software on the PC where HSLink
master is installed. All I/O data is collected in a constant period from slave
I/O modules to master. Then, HMI could access thes e data through local
PCI-bus.
Figure 1.6: HSLink for SCADA
16DI
16DI
16DI
HSL Master
RJ45/10BaseT
Slave I/O Module
Slave I/O Module
Slave I/O Module
HMI
Software
