ADLINK Technology DLAP-3000 Series, User Manual, Page: 118 / 141

108 BIOS Setup
Leading
EDGE COMPUTING
C.4.20 Advanced > [Network Name] Network Configuration
C.4.21 Advanced > RAM Disk Configuration
Ipv6 PXE Support
Disabled
Enabled
Enables/Disables IPv6 PXE boot support. If
disabled, IPv6 PXE boot support will not be
available.
Ipv6 HTTP Support
Disabled
Enabled
Enables/Disables IPv6 HTTP boot support.
If disabled, IPv6 HTTP boot support will not
be available.
IPSEC Certificate Disabled
Enabled
Enables/Disables IPSEC certificate for Ikev.
PXE boot wait time 0-5
Default: 0
Wait time in seconds to press ESC key to
abort PXE boot. Use /- or numeric
keys to set the value.
Media detect count 1-50
Default: 1
Number of times the presence of media will
be checked. Use /- or numeric keys
to set the value.
Feature Options Description
This sub-menu is controlled by device firmware, refer to the actual layout.
Feature Options Description
Disk Memory Type:
Boot Service Data
Reserved
Specifies type of memory to use
from available memory pool in
system to create a disk.
Create raw ► Sub-Menu Create a raw RAM disk.
Create from file ► Sub-Menu Create a RAM disk from a given file.
Created RAM disk
list: Info only
Remove selected
RAM disk(s) Remove selected
RAM disk(s)
Feature Options Description