ADLINK Technology cPCI-3920 Series User Manual Download | Manualshive

Page: 59 / 106

background image

Functional Description

49

3.4

Board Interfaces on RTM

There are two identical USB interfaces on the CPCI-R3920(T)
RTM, each with a maximum transfer rate of 480 Mb!s provided for
connecting USB devices. One USB peripheral may be connected
to each port. To connect more USB devices than there are avail-
able ports, an external hub is required.

USB Connectors CN7-R and CN8-R

Table 3-17: RTM USB Connector Pin Definitions

Note:

The CPCI-R3920(T) host interfaces can be used with maxi-

mum 500 mA continuous load current as specified in the Uni-

versal Serial Bus Specification, Revision 2.0. Short-circuit

protection is provided. All the signal lines are EMI-filtered.
The Rear I/O interface supports the USB 1.1 and USB

2.0 standards. For USB 2.0 it is strongly recommended to

use a cable length not exceeding 3 meters.

Gigabit Ethernet Interfaces

Gigabit Ethernet signals are available either on the front R-J45
connector or on the Rear I/O interface due the implemented
switches on the cPCI-3920. Both Gigabit Ethernet channels are
individually switchable to front or Rear I/O. Switching over from
front to Rear I/O or vice versa is effected using the BIOS settings
or the board-specific registers (default: front I/O). For further infor-
mation on the BIOS settings, refer to Chapter BIOS.

The interfaces provide automatic detection and switching between
10Base-T, 100Base-TX and 1000Base-T data transmission (Auto-
Negotiation).

The CN6-R connector supplies the 10Base-T, 100Base-TX
and 1000Base-T interfaces to the Ethernet controller.

Pin # Signal Name

1

Vcc

2

UV0-

3

UV0+

4

GND

«
...
57
58
59
60
61
...
»

Summary of Contents for cPCI-3920 Series











































































































Reviews:

No comments

Related manuals for cPCI-3920 Series

Brand: Qorvo Pages: 8

Brand: ASROCK Pages: 126

Brand: Biostar Pages: 47

Brand: IEI Technology Pages: 126

Brand: Linear Technology Pages: 16

Brand: Xilinx Pages: 56

Brand: AOpen Pages: 8

Brand: ZiLOG Pages: 42

Brand: ICP Pages: 50

Brand: Gigabyte Pages: 96

Brand: Microchip Technology Pages: 2

Brand: AIC Pages: 58

KX224-I2C-EVK-001

Brand: Rohm Pages: 3

Brand: Texas Instruments Pages: 23

Brand: Octek Pages: 84

Brand: EPOX Pages: 83

Brand: Systium Technologies Pages: 5

Brand: BPM Microsystems Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands