ADLINK Technology cPCI-3920 Series User Manual Download

Page: 85 / 106

BIOS Setup Utility

ATA/IDE Configuration

This item specifies whether the IDE channels should be initial-
ized in Compatible or Enhanced mode of operation. The set-
tings are

Disabled

Compatible

and

Enhanced

Configure SATA as

This item specifies SATA channels transport to what kind of
channels. The settings are

IDE mode

and

AHCI mode

Primary IDE Master, Primary IDE Slave, Secondary IDE
Master, Secondary IDE Slave

Select one of the hard disk drives to configure it. Press
< Enter > to access its sub menu.

Hard Disk Write Protect

This will be affective only if device is accessed through BIOS.
The settings are

Enabled

and

Disabled

IDE Detect Time Out (Sec)

Select the time out value for detecting ATA/ATAPI devices. The
settings are

0 sec, 5 sec, 10 sec, 15 sec, 20 sec, 25sec, 30

sec,

and

35 sec

Summary of Contents for cPCI-3920 Series











































































































Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands

ADLINK Technology cPCI-3920 Series, User Manual

Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands