ADLINK Technology cPCI-3920 Series User Manual Download

Page: 62 / 106

Functional Description

SATA1-3 Connectors CN2-R, CN4-R and CN5-R

Table 3-21: SATA1-3 Connectors Pin Definition

Note:

When using a Serial ATA cable, it is recommended to use a

special right-angled Serial ATA cable due to possible space

limitations within the system. For further information, contact

ADLINK´s Technical Support.

Rear I/O Interfaces on CompactPCI Connector rJ2

The cPCI-3920 Rear Transition Module conducts a wide range of
I/O signals through the Rear I/O connector rJ2.

To support the Rear I/O feature a special backplane is necessary.
Do not plug a Rear I/O configured board in a non-system slot Rear
I/O backplane. Failure to comply with the above may result in
damage to your board.

Pin # Signal Pin # Signal

GND

RX-

TX+

RX+

TX-

GND

Summary of Contents for cPCI-3920 Series











































































































Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands

ADLINK Technology cPCI-3920 Series, User Manual

Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands