ADLINK Technology cPCI-3920 Series User Manual Download

Page: 47 / 106

Functional Description

Gigabit Connector RJ-45 Pin Definitions (CN7/CN8)

The CN7/CN8 connector supplies the 10Base-T, 100Base-
TX and 1000Base-T interfaces to the Ethernet controller.

Table 3-7: Gigabit Connector CN7/CN8 Pin Definitions

Ethernet LED Status

SPEED (green):

When green it indicates a 1000BASE-TX connection. When not
lit and the ACT-LED is active, the connection is operating at
100BASE-T.

ACT (yellow):

This LED monitors network connection and activity. The LED
lights up when a valid link (cable connection) has been estab-
lished. The LED goes temporarily off if network packets are
being sent or received through the RJ-45 port. When this LED

10BASE--T

100BASE--TX

1000BASE--T

PIN

I/O

SIGNAL

I/O

SIGNAL

I/O

SIGNAL

O TX+ O TX+ I/O

BI_DA+

O TX- O TX- I/O

BI_DA- 2

I RX+ I RX+ I/O

BI_DB+

-- -- -- -- I/O

BI_DC+

-- -- -- -- I/O

BI_DC-

I TX-- I RX--

I/O

BI_DB-

-- -- -- -- I/O

BI_DD+

-- -- -- -- I/O

BI_DD-

Summary of Contents for cPCI-3920 Series











































































































Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands

ADLINK Technology cPCI-3920 Series, User Manual

Search results

Summary of Contents for cPCI-3920 Series

Reviews:

Related manuals for cPCI-3920 Series

Brands by name

Popular brands