ADLINK Technology cExpress-AL User Manual Download

Page: 87 / 106

cExpress-AL

BIOS Setup

Feature

Options

Description

Boot Option #6

USB Floppy

Set the system boot order.

Boot Option #7

USB Lan

Set the system boot order.

Boot Option #8

Network

Set the system boot order.

7.7.

Save & Exit Menu

7.7.1.

Save and Exit

Feature

Options

Description

Save Changes and Exit

Exit system setup after saving the changes.

Discard Changes and Exit

Exit system setup without saving any changes.

Save Change and Reset

Reset the system after saving the changes.

Discard Changes and Reset

Reset system setup without saving any changes.

Save Options

Info only

Save Changes

Save Changes done so far to any of the setup options.

Save as User Defaults

Save the changes done so far as User Defaults.

Restore User Defaults

Restore the User Defaults to all the setup options.

Boot Override

Info only

Summary of Contents for cExpress-AL











































































































Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands

ADLINK Technology cExpress-AL, User Manual

Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands