ADLINK Technology cExpress-AL User Manual Download

Page: 58 / 106

BIOS Setup

7.2. Main

7.2.1.

Main > BIOS Information

Feature

Options

Description

BIOS Vender

Info only

American Megatrends

BIOS Version

Info only

ADLINK BIOS version

Build Date

Info only

ADLINK BIOS Build Date

MRC Version

Info only

Display MRC Version

GOP Version

Info only

Display GOP Version

TXE FW Version

Info only

Display TXE FW Version

BIOS Boot Source

Info only

Display BIOS Boot Source

7.2.2.

Main > System Information

Feature

Options

Description

Project Name

Info only

Display Project Name.

CPU Board version

Info only

Display CPU Board Version.

CPU Board String

Info only

Display CPU Board String.

CPU Frequency

Info only

Display CPU Frequency.

Total Memory

Info only

Display Installed Memory Size.

Memory Frequency

Info only

Display Memory Frequency.

SOC SKU

Info only

Display SOC SKU Version

7.2.3.

Main > Board Information

Feature

Options

Description

Board Information

Submenu

Board Information

Info only

Serial Number

Info only

Display SEMA serial Number.

Manufacturing Date

Info only

Display SEMA manufacturing date.

Last Repair Date

Info only

Display SEMA last repair date.

MAC ID

Info only

Display SEMA MAC ID.

Runtime Statistics

Info only

Total Runtime

Info only

The returned value specifies the total time in minutes
the system is running in S0 state.

Current Runtime

Info only

The returned value specifies the time in seconds the
system is running in S0 state.
This counter is cleared when the system is removed
from the external power supply.

Power Cycles

Info only

The returned value specifies the number of times the
external power supply has been shut down

Summary of Contents for cExpress-AL











































































































Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands

ADLINK Technology cExpress-AL, User Manual

Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands