ADLINK Technology cExpress-AL User Manual Download

Page: 84 / 106

BIOS Setup

Feature

Options

Description

SATA Port 0 DevSlp

Disabled

Enabled

Enable/Disable SATA Port 0 DevSlp. Board rework for
LP needed before enable.

DITO Configuration

Disabled

Enabled

Enable/Disable DITO Configuration

DITO Value

625

DITO Value.
Note. DITO Value can be accessed if DITO
Configuration item must enable.

DM Value

DM Value.
Note. DM Value can be accessed if DITO
Configuration item must enable.

SATA1

Info only

Software Preserve

Info only

Port 1

Disabled

Enabled

Enable / Disable SATA Port

SATA Port 1 Hot Plug
Capability

Disabled

Enabled

If enabled, SATA port will be reported as Hot Plug
capable.

Configured as eSATA

Info only

Display Configured as eSATA support.

Mechanical Presence Switch

Disabled

Enabled

Controls reporting if this port has a Mechanical
Presence Switch.
Note. Request Hardware support.

Spin Up Device

Disabled

Enabled

If enabled for any of ports Staggerred Spin Up will be
performed and only the drives which have this option
enabled will spin up at boot.
Otherwise all drives spin up at boot.

SATA Device Type

Hard Disk Drive

Solid State Drive

Identify the SATA port is connected to Solid State
Drive or Hard Disk Drive.

SATA Port 1 DevSlp

Disabled

Enabled

Enable/Disable SATA Port 1 DevSlp. Board rework for
LP needed before enable.

DITO Configuration

Disabled

Enabled

Enable/Disable DITO Configuration

DITO Value

625

DITO Value.
Note. DITO Value can be accessed if DITO
Configuration item must enable.

DM Value

DM Value.
Note. DM Value can be accessed if DITO
Configuration item must enable.

7.4.4.4.

Chipset > South Cluster Configuration > SSC Configuration

Feature

Options

Description

SSC SD Card Support (D27:F0)

Disabled

Enabled

Enable / Disable SCC SD Card Support.

SCC eMMC Support (D28:F0)

Disabled

Enabled

Enable / Disable SCC eMMC Support.

eMMC Max Speed

HS400

HS200
DDR50

Select the eMMC max Speed allowed.

SCC UFS Support (D29:F0)

Disabled

Enabled

Enable / Disable UFS SDIO Support.

SCC SDIO Support (D30:F0)

Disabled

Enabled

Enable / Disable SCC SDIO Support.

Summary of Contents for cExpress-AL











































































































Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands

ADLINK Technology cExpress-AL, User Manual

Search results

Summary of Contents for cExpress-AL

Reviews:

Related manuals for cExpress-AL

Brands by name

Popular brands