21
aTCA-9710
3.1.4
Silicon Motion SM750 Graphics Controller
The aTCA-9710 provides an analog VGA port on the front panel powered by a Silicon Motion
SM750 2D graphics controller with the following features:
PCI-Express x1 architecture
16MB integrated video DDR memory
Low power consumption < 1.5W
300 MHz DAC supports up to 1920x1440 resolution
128-bit 2D graphic engine
ROPs, BitBLT, transparent BLT, pattern BLT, Color expansion, and Line drawing
YUV-16/32-bit
RGB conversion
Support 7 layers of display frames (2 hardware cursors, primary graphic, video, video
alpha, alpha, and secondary graphic)
Two 8-bit portsorone16-bitvideocaptureportsupportsITU601
and ITU 656 specifications UV-16/32-bit RGB conversion
ReduceOn Power Management Technology
Quick-Rotation features allow for 90°, 180°, and 270° rotation of on-screen images
3.2
Peripherals
The following peripherals are available on the aTCA-9710 blade
3.2.1 Reset
The aTCA-9710 is automatically reset by a precision voltage monitoring circuit that detects a
drop in voltage below the acceptable operating limit of 4.85V for the 5V line and below 3.2V for
the 3.3V line. Other reset sources include the Watchdog Timer, the face plate push-button
switch and also the RESET signal from the IPMC. The aTCA-9710 responds to any of these
sources by initializing local peripherals.
A reset will be generated by the following conditions:
Power failure, +5 V supply falls below 4.1 V (typ.) or +3.3 V supply falls below 2.93 V
(typ.)
Pushbutton
"RESET"
pressed
Watchdog
time-out
IPM controller reset
Summary of Contents for aTCA-9710
Page 7: ...7 aTCA 9710 1 2 Block Diagram ...
Page 41: ...41 aTCA 9710 Step 3 Push the ejector handles inwards until it is locked ...
Page 42: ...42 aTCA 9710 Step 4 Lock both ends of the captive screws ...
Page 45: ...45 aTCA 9710 Step 3 Pull the blade outwards from the chassis until it is removed ...