71
aTCA-9710
6.4.3
Common RefCode Configuration
You can use this screen to select options for the Common RefCode Configuration.
Use the up and down < Arrow > keys to select an item. Use the < + > and < - >
keys to change the value of the selected option. A description of the selected item
appears on the right side of the screen. The settings are described on this page.
The screen is shown below.
Numa
Enable or Disable Non uniform Memory Access (NUMA). Set this value to
Enable/Disable.
6.4.4
Memory Configuration
You can use this screen to select options for the Memory Configuration. Use the up
and down < Arrow > keys to select an item. Use the < + > and < - > keys to change
the value of the selected option. A description of the selected item appears on the
right side of the screen. The settings are described on this page. The screen is
shown below.
Summary of Contents for aTCA-9710
Page 7: ...7 aTCA 9710 1 2 Block Diagram ...
Page 41: ...41 aTCA 9710 Step 3 Push the ejector handles inwards until it is locked ...
Page 42: ...42 aTCA 9710 Step 4 Lock both ends of the captive screws ...
Page 45: ...45 aTCA 9710 Step 3 Pull the blade outwards from the chassis until it is removed ...
