ADLINK Technology AMP-304C, User Manual, Page: 25 / 63

Getting Started 15
AMP-304C
2.4.2 SW2 – End Limit Type Selection
The SW2 switch is used to set the type of end limit logic, which are
Normally Open (NO) and Normally Closed (NC). For example, if
the switch pin is set to “OFF”, the type of end limit logic is Normally
Open.
Table 2-3: SW2 End Limit Type Selection
Axis # SW2 Pin No. NO (Default) NC
0 1 OFF ON
1 2 OFF ON
2 3 OFF ON
3 4 OFF ON
ON
1 2 3 4