ADLINK Technology AMP-304C, User Manual, Page: 16 / 63

6 Introduction
1.4 Supported Software
1.4.1 OS Support / Software Compatibility
X
OS Support
Z Windows 7/10 (x86/x64)
X
Software Compatibility
Z Visual Studio VB.NET, C#, VC.NET
Z
APS Function Library Support
1.4.2 APS Functions
The AMP-304C is fully compliant with the APS (Automation Prod-
uct Software) function library, independent of programming lan-
guages and operating systems (OS). A complete detailed listing of
functions can be found in the APS Function Library User Manual.
1.4.3 MotionCreatorPro 2 (MCP2)
MotionCreatorPro2™ is a user interface exclusively developed for
ADLINK motion control products in a standard Windows environ-
ment to easily setup cards and axis parameters. A Setup Wizard
guides users through hardware installation and wiring as well as
single-axis manipulation in minutes.
MotionCreatorPro2™ not only effectively reduces development
time but also enables concurrent validation of overall mechanisms
and electric design with all single axis and interpolation motion
operation pages.