Page 5
Safety Parts (cont.)
N.B.
The machine can also be set to automatically shut down from the
PLC controller.
Oil filled heated roller:
Following heating the surface temperature of the oil filled roller
can
be in excess of 240°C
(464°F)
. While it is heating do not touch the roller
surface with any part of the body, to avoid crushing and/or burning. When
the machine is heating and/or operating, operators should always be
present to avoid roller damage or accidental fire, due to overheating.
1.4
Warning Symbols
Please pay attention to the following warning symbols, to reduce the
instance of serious injury and/or death during machine operation
and maintenance.
Anti Grinding
This sign is diplayed at the junction of the
upper and lower drive rollers
on both sides, at
the front of the machine.
The rubber roller is dangerous in operation, so
care must be taken to keep hands, hair, clothing or
other parts of the body clear.
High Voltage
This sign is displayed at the inner flank of the
power box.
Do not touch to avoid burns and/or electric shock,
which can result in serious injury or death.
Chain
This sign is displayed on the inner flank of the
left box.
The chain is dangerous in operation, so care must
be taken to keep hands, hair, clothing or other
parts of the body clear.
Burning Prevention
This sign is displayed at the front of the
cabinet near the heated oil drum.
The oil drum coated with black Teflon™ is hot
during operation and cool down of the machine so
care must be taken to keep hands, hair, clothing or
other parts of the body clear until the machine has
fully cooled down.
Summary of Contents for Alpha Calender Roll-Master 1.2
Page 20: ...4 2 Control Panel Page 17...
