Page 3
1.2
Safety Tips
♦
Our customer service
department
has its own service
engineers and, if required, maintenance is available.
♦
The Alpha Calender Roll-Master 1.2
meets the European
Legislation standard. Under normal conditions accidents are
rare. However listed below are some practical points to ensure
your safety.
•
Make sure there is sufficient space around the machine
for the heat to dissipate from the drum, without interference.
Only persons fully trained should operate this machine.
•
Always switch off
the current (and pull plug out of the
socket) when undertaking maintenance work or when
cleaning the machine.
•
Ensure that there is
sufficient space around the machine.
Cables and connections must not get jammed. Although the
heat radiation of the press is low, there should be enough
space for cooling down.
•
Avoid contact
with the heating drum.
♦
DO NOT REMOVE ANY INSTRUMENT COVERS
UNLESS QUALIFIED TO DO SO
- touching internal parts is
dangerous and may cause shock hazard. All electrical
connections inside covers are live. Never operate Press with any
covers and/or guards removed.
♦
PROTECT THE MAINS CABLE
- damage to the mains cable
may cause fire or shock hazard. When unplugging, hold by the
plug only and remove carefully. Take care that the mains cable
does not come into contact with the heating drum (or moving
parts of the machine) during operation of the machine.
♦
OPERATING AMBIENT TEMPERATURE RANGE
-
the
operating ambient temperature range is 0
o
C - 35
o
C,
(32
o
F -
104
o
F)
and humidity of 20 - 80%.
♦
MACHINE FUSE(S)
–
28.1 Amps.
♦
WARNING - THIS APPARATUS MUST BE EARTHED
(GROUNDED)
♦
CAUTION
This machine gets hot whilst operating. Take care not to touch
any surfaces that are labelled “HOT”.
♦
MACHINE OPERATION
Only persons trained to do so should operate this machine
.
1.2.1
Before switching on the machine,
make sure that all
electrical wires are connected correctly. The body of the
Summary of Contents for Alpha Calender Roll-Master 1.2
Page 20: ...4 2 Control Panel Page 17...
