background image

 

                                                     

Page 20 

6.  Guarantee (Limited Warranty) 

 

 

 

A. Adkins & Sons Limited 

warrants that the press is free from defects 

in material and workmanship for a period of 12 months from the date of 

supply to the customer.  The machine comes with a one year warranty on 

parts and 90 days labour. 

 

This warranty covers 

all parts to repair the defects, except when damage 

results from misuse or abuse, accident, alteration or negligence or when 

a machine has been improperly installed. 

 

If a press covered by warranty

 should need to be returned to the factory 

for examination and repair, if on-site component replacement is not 

possible, A. Adkins & Sons Limited will make every effort to repair the 

customers press. The warranty will only be effective when A. Adkins & 

Sons Limited authorises the original purchaser to return the machine to 

the factory and only when the product upon examination has proven to 

be defective. 

 

Should in our opinion

 any part of this press be defective in materials or 

workmanship, it will be replaced or repaired free of charge, provided that 

the press has been installed and operated in the correct manner and not 

subjected to misuse. If A. Adkins & Sons Limited authorise a replacement 

press, the warranty of the replacement press shall expire on the 

anniversary date of the original machines invoice to the customer. 

 

In order for this warranty to be effective

, no return of machine or parts 

may be made without prior factory authorisation. (This will exclude any 

travelling and/or carriage costs which will be charged at our discretion). 

 

This is the sole warranty given by the company

; there are no 

warranties, which extend beyond the description on the face hereof. The 

seller disclaims any implied warranty of merchantability  and/or any 

implied warranty of fitness for a particular purpose; the buyer agrees that 

the goods are sold “as is”. A. Adkins & Sons Limited does not warrant 

that the functions of the press will meet the customer’s requirements or 

expectations. The entire risk as to use, quality and performance of the 

press lies with the customer. (No claim of any kind shall be greater than 

the sale price of the product or part to which the claim is made). 

 

In no event will A. Adkins & Sons Limited 

be liable for any injury, loss 

or damage, including loss of profits, destruction of goods or any special, 

incidental, consequential or indirect damages arising from the use of the 

press or accompanying materials. This limitation will apply even if A. 

Adkins & Sons Limited or its authorised agent had been advised of the 

possibility of such damage. 

 

Summary of Contents for Alpha Calender Roll-Master 1.2

























Reviews: