Page 9
Pre-Shrinking of Felt Blanket (cont.)
Caution:
If there is a sudden loss of power whilst the machine is operating
at high temperature use the hand wheel immediately to move the
felt blanket backwards, and then insert soft paper board or papers
(around 2 mm to 4 mm in thickness) between the oil drum and
the felt blanket, to prevent burning of the felt.
3.2
Horizontal Adjustment
When transfer working is finished please turn the heating off and
keep the blanket running until the temperature reduces to
80°C
(176°F)
. Or activate the ‘auto-off’ function by switching off the ‘heating
‘on/off’ button and the power ‘on/off’ button, and the machine will auto-
off after several hours running, to cool down.
When you restart the machine after a prolonged period of inactivity
it is suggested to pre-heat the felt blanket at a temperature of 200°C
(392°F)
for 3 hours, especially during the colder winter months.
Please use a spirit level of at least 3m to perfom initial levelling of the
machine at its new location using the adjustable feet to perform the
changes.
Precise measurements should be taken both horizontally and vertically to
ensure all parts of the machine are perfectly level.
Summary of Contents for Alpha Calender Roll-Master 1.2
Page 20: ...4 2 Control Panel Page 17...
