ADIC VLS AIT, Installation And Operating Manual, Page: 46 / 90

32 Operation and Maintenance
Figure 11. Pushing the Magazine in Place
The magazine will snap into place. If you don't hear a click, make sure that the slot on the right
side of the magazine has slipped around its magazine position pin and is not just sitting on top
of it (the magazine will not load correctly in this position).
Loading the Magazine
Once you have placed the magazine on the carriage, the VLS must initiate a loading process.
During this procedure the VLS checks and maps the position of each cassette and makes sure
that all cassettes are inserted into the magazine correctly. If you are using the sequential mode
the VLS inserts the first cassette into the drive.
Note
DXU T__b ]ecd RU S\_cUT RUV_bU dXU <?14 _b E><?14 Ve^SdY_^c gY\\
QSdYfQdU
❐
Make sure the magazine is placed correctly on the carriage.
❐
Close the door and press ALT and then LOAD . The VLS will initiate the load magazine
procedure.