ADIC VLS AIT, Installation And Operating Manual, Page: 36 / 90

22 Equipment Description
Note
C3C9 @QbYdi TUVQe\d* @QbYdi 3XUS[* >
Off-Line Time
Lets you set the number of minutes the VLS will remain in the Off-Line mode. If someone
leaves the VLS in an Off-Line mode, after the pre-set number of minutes the VLS will
automatically return On-Line. This assures that your automatic backup will be done even if the
VLS has accidentally been left Off-Line.
Use UP or DOWN to select the number of minutes you wish the VLS to remain Off-
Line. Press ENTER to execute the change.
Note
?VV\Y^U dY]U TUVQe\d* % ]Y^edUc
Drive Configuration
This function lets you enable or disable which drives are on-line.
Use LEFT or RIGHT to select the drive you wish to change. Use UP or DOWN
to select "Y" to put the drive on-line or "N" to disable the drive. If you have only one drive
installed, you cannot access the Drv B field.
Note
1 TYcQR\UT TbYfU Yc cdY\\ S_^^USdUT d_ dXU C3C9 Rec Q^T gY\\ bUc`_^T d_
dXU \Qcd QTTbUcc cUddY^W D_ QccebU dXQd QTTbUcc SXQ^WUc Q^T TbYfU
S_^VYWebQdY_^ SXQ^WUc QbU Ve\\i Y^YdYQdUT i_e ]ecd SiS\U `_gUb
Disabling both drives is not allowed (setting "N" in Drv A or Drv B field automatically places
"Y" in the other field).