ADIC VLS AIT, Installation And Operating Manual, Page: 34 / 90

20 Equipment Description
To access the Off-Line menu, press the MENU button. The display will appear as follows:
Use the UP or DOWN buttons to scroll through the menu. Press ENTER to select a
displayed item. Use the RIGHT or LEFT buttons to scroll through fields on the same
line.
To exit the Off-Line menu press the MENU button.
Configuration Menu
The Configuration Menu allows you to select the following operating parameters:
•
Buzzer Configuration
•
SCSI ID Configuration
•
SCSI Parity
•
Off-Line Time
•
Drive Configuration
•
On-Line Mode (Single Drive models only)
•
Sequential-Access Mode Configuration (Single Drive models only)
Buzzer Configuration
Enables/disables the sounding of an alarm when an error message is displayed.
Enables/disables the beep sound when you press a keypad button.
When you select the Buzzer Configuration option a display similar to the following appears:
To enable the error alarm use the LEFT button to select the ErrAlarm field. Use UP or
DOWN to select "Y" to enable alarm or "N" to disable alarm. When Error Alarm mode is
enabled, a continuous alarm tone will sound in the event of an error message. The alarm will
sound until the condition that caused the error has been removed or any key is pressed. To
clear an error message from the display, press
ALT and ENTER.