manualshive.com logo in svg

ADIC FCR 200, Operator'S Manual

Share
Download
ADIC FCR 200 Operator'S Manual Download Page 46

 

4-6

Installation

 62-9301-01

Installation Procedure

1

Remove the router from the protective bag.

2

Determine where the FCR200 will be mounted.

3

Remove any blanking panels and other equipment 
from the chosen rack location.

4

Install the cage nuts on the vertical mounting rails 
in the rear of the rack cabinet in accordance with the 
desired mounting method.

Figure 4-2

Cage Nut Installation

Ear Rail Mounting

If you are mounting the FCR200 in the front of the rack with 
the connectors facing the back or in the back of the rack with 
the connectors facing the front, attach the mounting ears, 
using phillips screws, as shown in Figure 4-3 on page 4-7.

Note

Place the FCR200 
so the rear fan 
vent and the front 
intake vents 
remain clear of 
obstructions to 
ensure proper 
airflow.

WARNING

To reduce injury or equipment damage, the
mounting bracket must be level. If the
brackets are not level, the FCR200 cannot
be installed properly.

Summary of Contents for FCR 200













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands