ADIC FCR 200, Operator'S Manual

Page: 43 / 140

Installing the FCR200 4-3
4-
Installing the FCR200
This chapter describes how to setup and install the FCR200.
This includes unpacking the FCR200 for the first time, factors
to consider when installing the FCR200, either desktop or rack
installation instructions, and connecting to different types of
devices. Read this chapter carefully and completely before
working with the FCR200.
A number of factors need to be considered in planning the
installation of the FCR200. These factors include the location
of the unit, the use of the unit, and the type of devices to which
the unit will be attached.
Location
The FCR200 Router can be placed on a desktop or mounted in
a standard 19-inch rack depending on the specific
requirements of the installation. The operating environment
should meet the requirements found in Chapter 2. If you plan
to use the router on a tabletop, attach the stick-on feet to the
bottom of the router to protect the surface.
Note
The FCR200
contains a cooling
fan mounted in
the rear of the
enclosure and
intake vents on
the front of the
enclosure. The
rear fan vent and
the front intake
vents should
remain clear of
obstructions to
ensure proper
airflow.