Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / Serial - Converter
Document code: MN67831_ENG Revision 1.100 Pagina 19 di 56
SET COMMUNICATION:
This section define the fundamental communication parameters of Serial and DALI bus.
By Pressing the “
Set Communication
” button from the main window for SW67831 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The means of the fields for the “Serial” section are:
In the field “
Baudrate
” the baudrate for the serial line is defined;
In the field “
Parity
” the parity of the serial line is defined;
In the field “
ID Board
” the ID of the converter is defined;
The means of the fields for the “DALI” section are:
In the field “
DALI Console Port
” the UDP port used for the communication with ‘DALI Console’
software is defined;
If the field “
Enable DALI 2
” is checked, DALI 2 protocol is enabled.
The means of the fields for the “Ethernet” section are:
In the field “
IP ADDRESS
” the IP address of the converter is defined;
In the field “
SUBNET
Mask
” the SubNet Mask is defined;
In the field “
GATEWAY
” the default gateway of the Ethernet network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
Figure 3: “Set Communication” window
