Adey MagnaClean CMX, Installation And Servicing

Page: 13 / 24

13
Warning Conditions for Trigger Scrolled Message “Auto Reset” “Action on Outputs”
Pump Fail Current Sense
Parameter = Y
Pump Activated
Current level below
125mA Pump Fail
N
Pump – OFF
Buzzer – ON
LED Light – ON
Common Alarm – ON
Service
Interval
Alarm
Actual date beyond
Service Date (Control
will not clear error
until new service date
entered)
Filter Service
Required
N
Pump – ON
Buzzer – ON
LED Light – ON
Common Alarm – ON
Magnet-
Only
Service
Warning* Magnet-only service
requirement value has
been reached Magnet-Only
Service Warning
- Hold MUTE for 5
secs to reset
N
Pump – ON
Buzzer – ON
LED Light – ON
Common Alarm – OFF
Pressure
Differential
Warning
Pressure Differential
Warning value has
been reached
Differential
Pressure Warning
- Check Cartridge
Y
Pump – ON
Buzzer – ON
LED Light – ON
Common Alarm – OFF
Pressure
Differential
Alarm Pressure Differential
Alarm value has been
reached (Control will
not clear error until
new service date
entered) Filter Service
Required
N
Pump – OFF
Buzzer – ON
LED Light – ON
Common Alarm – ON
Low
Temperature
Alarm
Low temperature
alarm value reached
Low Temperature
Warning
Y
Pump – ON
Buzzer – ON
LED Light – ON
Common Alarm – ON
High
Temperature
Alarm High temperature
alarm value reached High Temperature
Warning
Y
Pump – ON
Buzzer – ON
LED Light – ON
Common Alarm – ON
*NOTE: When the “Magnet-Only Service Warning” alarm is activated, the alarm is a service
reminder only which can be reset by holding down the MUTE button for 5 seconds. When the alarm
is reset via the mute button, the alarm will reinstate the previous Parameter 2 & 3 values, e.g. if
Parameter 2 is set to “Weekly” the controller will provide another warning alarm in 2 weeks until/
unless default parameters are manually updated/changed.