11
/
19
10. START UP
Have a specialist electrician your device working 380-400 V connect to the K-automat fuses group.
Device must not be operated without being made adequate grounding and from the electricity source, which do not
have leak current relay.
Water supply connection must be made and its valve must be open
Water drainage connection must be made.
Before placing things into the baskets, solid wastes must be cleaned and subjected to pre-washing by washing buttery
with sprayer.
Do not place more dirty dishes than stated in the Table into baskets.
Do not use any detergent for pre-washing.
Keep the very dirty dishes (waiting ones more than 2-3 hour) under water until complete dissolving
Do not wash materials made of plastic.
Use foam controlled liquid detergent in your machine.
Have the detergent firm dosing apparatus to supply detergent into your machine connect.
Have the detergent firm dosing apparatus to supply polisher into your machine connect.
Check the water supply hose and water drainage connection.
Fix overflow pipe into its place.
Open the valve of pressured hot water supply.
Place the basket, in which you place the things to be washed, in machine.
DWASH100
Close the device cover.
Bring the switch from the position “0” into position “1”. In this case, control lamp lights on.
Machine takes the water into the tank and heats up it. When the water is ready, lamp “ready” lights on.
When the cover of the machine is opened and closed, program starts automatically.
Washing time can be adjusted as 30 seconds for the 1
st
program, 60 seconds for 2
nd
program 90 seconds for 3
rd
program.
During washing and stopping, the lamp “it is washing” lights on.
After 4 seconds from stopping of rinsing, this lamps
lights off. When this lamp lights off, the operation programmed is completed.
Open the cover and take the pots out. You can load the machine to be washed into the machine.
When the cover is opened, the machine stops.
If the cover is opened or closed after the program starts, program continues to run from the point it stops.
Bring the switch into position “AW” in order to make manually washing.
Bring the switch into position “AR” in order to mak
e automatically washing.
When the washing pump of the machine encounters any forcing, voltage fluctuation or failure, the lamp of thermal relay is
going to light on. In this case, opening the control panel of the machine, one must press on the reset button of thermal
relay
.
Be careful of not running the cover holder, after opening the cover.
